910 Model Single Layer High Rib Portable Wall Sheet Profiling
Rolling form machine
1, Product Application
This kind of machine make two types of tile together perfectly, it
has reasonable structure, beautiful appearance, with advantage of
saving space, easy operate and especially welcomed by the customer
with limit area.
2, Components and Technical Specification:
1). Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand.
Loading capacity: 5T
Inner diameter: 500-508mm
2). Feeding Table
Put the raw material(steel plate) through the beach to manufacture
and process, it can guarantee that the products are neat, parallel
and everything is uniformity. Please refer to the equipment
regulation to know the function of locate angle iron.
3). Hydraulic System
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
4). Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use.
5). Cutting System:
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment.
6). Output Table:
It adopts welded steel and supported roller to transmit the
products,which is used to collect the finished products.
3, The chart of process flow of Rib roll forming machine:
Uncoiler - roll forming machine - computer control system -
hydraulic control system - cutting system - output table
4, Main Equipment: